CHAPTER 6
Instructions, use and maintenance manual
D r a g o P 1 P L U S
Page 73
6.2.2. HIGH FLAME ADJUSTMENT
IMPORTANT!
All burners are adjusted by our technicians before being shipped.
To change the factory settings, carry out the procedure described below.
For the high flame adjustment procedure, carry out the operations described below:
STEP
ACTION
PICTURE
1
Press and rotate the selection knob anti-clockwise.
2
Set the selection knob on the “HIGH FLAME” symbol.
3
Extract the knob “
A
” by grasping it with your fingers and
pulling it firmly outwards.
A
4
Adjust the height of the high flame by actuating the screw “
B
”:
•
tighten to reduce the flame;
The correct flow rate is obtained when the flame reaches the
centre of the oven cupola.
B
