CHAPTER 7
Instructions, use and maintenance manual
D r a g o P 1 P L U S
Page 83
7.4. SPECIAL MAINTENANCE
CAUTION!
Extraordinary maintenance and repair of the machine are only allowed by qualified, trained and |
authorised technicians, employed by the Manufacturer or by the authorised service centre.
These procedures require a thorough and specialist knowledge of equipment, necessary
operations, related risks and correct procedures to work safely.
The interventions not included among those listed under"routine maintenance" are considered "special
maintenance" interventions.
Should any exceptional circumstances occur, for which special maintenance is necessary, the user’s maintenance
operators are required to follow this procedure:
•
perform the operations described in the paragraph “Special Maintenance”;
• if the operations to be executed are not provided for in this manual, send the Manufacturer a report of the
event occurred, along with the outcome of the inspection and any comments.
The Manufacturer or the authorised service centre will consider the situation on a case-by-case basis.
They will then agree with the routine maintenance engineers the type of procedure to be performed, choosing the
most suitable solution among those listed below:
• the Manufacturer sends its skilled technician, who is trained and authorised to perform the necessary
operations;
• or the Manufacturer authorises the user's maintenance operators to perform the procedures, providing any
additional instructions.
CAUTION!
The spare parts to be replaced are to be ordered from AVANZINI BRUCIATORI s.r.l.
Should the customer not use genuine spare parts or parts authorised in writing by the Manufactur-
er, the latter shall be relieved of any liability as regards machine operation and operators' safety.
Authorisation and/or instructions must always be given in writing. It is forbidden to operate the
machine without written permission and the Manufacturer disclaims any and all responsibility.
