CHAPTER 7
Instructions, use and maintenance manual
D r a g o P 1 P L U S
Page 87
7.5.3. FLAME ARRESTOR REPLACEMENT
For the flame arrestors replacement procedure, carry out the operations described below:
STEP
ACTION
PICTURE
1
Loosen screws “A” located on the right side
with a cross-head screwdriver.
To
A
2
Loosen the Allen screws “B” (ø 4mm), marking
down their position for the subsequent fixing of
the new flame arrestor.
B
B
3
Remove the flame arrestor “C” by pulling it out.
C
4
Place back the flame arrestor by carrying out
the steps in reverse order.
