CHAPTER 3
Instructions, use and maintenance manual
Page 26
D r a g o P 1 P L U S
RISK
DESCRIPTION AND PROCEDURAL INFORMATION
RISK OF EXPLOSIVE ATMOSPHERE
Necessary PPE
The machine is not suitable to operate in explosive or classified
environments.
Using it in explosive or partially explosive atmospheres is strictly
prohibited.
The machine is therefore not suitable to work in the following
environments:
•
explosive or partially explosive;
•
with high dust concentrations;
•
with the risk of fire resulting from any material or triggering source.
STATIC ENERGY RISK
Necessary PPE
Failure to disconnect the electrical part during maintenance and
failure to respect the prescriptions indicated by the manufacturer in
the instructions and warnings manual.
ELECTRICAL POWER RISK
Necessary PPE
The following safety measures are recommended:
• Pay the utmost attention to the safety labels regarding the
electrical risk.
•
Do not perform maintenance without first having electrically cut off
and locked the machine.
CAUTION!
Do not operate without using specific PPE with a
double insulation protection.
LIGHTNING
Necessary PPE
The evaluation of the equipment necessary for protection against
lightning in order to transmit any electrical discharges to the ground is
the responsibility of the user/final customer.
Inform maintenance personnel and make sure that they are properly
instructed in carrying out the activity as well as aware of the residual
risks present.
Make sure that the earth connections are always connected and
efficient. It is prohibited to perform maintenance on the electrical
equipment with the plant running in harsh weather conditions (risk of
lightning or storms).
Always wear clothing suitable for the work to be performed
The earthing system must be checked as frequently as laid down by
law.
It is the responsibility of the user to:
• analyse the risks that might occur during handling and installation at his/her premises (the analyses done on
the handling of the machine only took into consideration the characteristics of the same);
• awareness-raising and training of the personnel in charge of performing operations on work stations as well
as machine operators;
• apply the visual safety signs in the work environment after having evaluated the risks inside the areas of
transit or control.
