background image

Only  original  fault-free  parts  must  be  used.  Use  of 
non-original parts renders the manufacturer’s warranty void 
and  invalidates 

any 

type 

of 

approval. 

No 

modification,  extension  or  reconstruction  of  the  service 
lift  is  allowed  without  the  manufacturer’s  prior  written 
consent.  No  warranty  is  provided  against  damage 
resulting 

from 

reconstruction  or  modification  of 

equipment  or  use  of  non-original  parts  that  are  not 
approved by the manufacturer.

In case self-locking nuts are used, these nuts must not be
used once it has become possible to loosen by hand and
in no case should they be reused, but must be replaced.

  CAUTION

Avoid injury — follow all instructions.

  NOTICE

The owner must verify the need for third-party service
lift inspections with the local authority and comply with
specified standards.

1.4 Terms and definitions

Terms

Definitions

Certified

technician

Person who has gone through the relevant
training associated with the scheduled task
from Avanti or from a certified trainer and is in
possession of a valid (non expired) certificate
for the task.

User

Person who has gone through the relevant
training associated with the Avanti service lift
use and daily inspection and is in possession
of a valid (non expired) certificate for the task.

(Also manual 

no-powerdescent)

Action performed to descend the lift at a

 

 

controlled speed without power supply by

  

 

manually opening the hoist electromagnetic 
brake.

 

4

Manual

 descent

Summary of Contents for OCTOPUS XL120





































Reviews: