Avanti OCTOPUS XL120, User Manual

Page: 21 / 36

1 8
4 Daily inspection and instructions for use
4.1 Daily inspection
NOTICE
The daily inspection must be recorded for future reference filling in the User Log Sheet Appendix.
4.1.1 Overall
Cabin and Cabin
components
Visually check the cabin and its components are assembled correctly and these are free of cracks, dents and disparities.
• Cabin structure
• Doors and covers
•
(If provided) Internal light
• Anchor points
• Internal emergency ladder
• Cabin control boxes
• Hoist and Fall arrest device
(See figure 2 5 : Check t h e FAD fixing adapter has moved downwards. In such case, DO NOT USE THE LIFT).
• Top and bottom obstruction devices
• Switches
• Warning lights
• Guiding system (guiding rollers)
Hour meter Record the hour meter reading on the
User log sheet.
4.1.2 Control and safety devices
4.1.2.1 Internal cabin control
Check that the safety devices are in place and working:
Installation
components
Function/System Operations
Visually check that the WTG installation components are mounted in accordance with the specifications and without any
noticeable defects or missing components.
• Platform control boxes
• Traction and safety wire ropes
• Guiding system (guiding ladder)
• Travelling cable pulley
• Electrical cables and electrical plugs
• Interlock system
Travel path Visually check that there are no obstacles in the travel path which may obstruct the movement of the service lift.
Figure 2 5 : FAD fixing adapter
Main switch
1.
Turn the main switch on the bottom platform control box to the
/&&
position.
The green light must be
5,,
. The service lift must not run.
2.
Turn the switch
/.
.
TT
he green light must be
54
.
Green light (ready) - Service lift
1.
Close and lock the bottom platform gallery door and the service lift door.
2.
Turn the trapped key to the
/.
position (if installed).
The green light must be
ON.
It should not be possible to remove the trapped key unless it is switched
OFF again.
%-%2'%.#934/0
button
1.
Press the
%-%2'%.#9 34/0
button on the Main control box.
The service lift should not move
UP or DOWN.
2.
Release the
%-%2'%.#9 34/0
button.
Function/System Operations