Avanti OCTOPUS XL120, User Manual

Page: 16 / 36

5
6
1
2
3
4
2
1
Figure 11 : Bottom platform control box,
automatic send configuration with guard locking
Bottom platform control box
1 Main switch
2 Ready light (green)
Figure 12 : Bottom platform control box,
automatic send configuration for fences with
trapped key or electrical switch monitoring
system
Bottom platform control box
1 Main switch
1 3
3.5.2 Platform control boxes
3.5.2.1 Bottom platform control box
There is a control box installed in the bottom platform.
This control box has a main switch. Turn the switch to the
OFF position to disconnect the power to the service
lift. The main switch must be OFF when the lift is not in
use, when leaving the wind turbine and while the wind
turbine is operating. The switch must be OFF before the
generator is turned on.
3.5.2.1.1 Automatic send configuration
3.5.2.1.1a Versions with guard locking
3.5.2.1.1b Versions with trapped key or electrical
switch monitoring system
1
3.5.2.1.2 Send / call configuration
1
6
2
3
4
5
Figure 13 : Bottom platform control box, send/
call configuration
Bottom platform control box
1
2
3
4
5
6
Main switch
UP button
Ready light (green)
DOWN button
Platform indicator light (green)
EMERGENCY STOP button
3.5.2.2 Top platform control box
3.5.2.2.1 Send / call configuration
1
2
3
4
5
Figure 1 4 : Top platform control box, send/call
configuration
Top platform control box
1
2
3
4
5
UP button
Ready light (green)
DOWN button
Platform indicator light (green)
EMERGENCY STOP button
All the controls are hold to run.
All the controls are hold to run.
3.5.1.2 User control box
See section 3.5.1.1.1 Main control box. The User
control box is integrated into the Main control box.