Avanti OCTOPUS XL120, User Manual

Page: 25 / 36

2 2
4.3.5 Operation from inside the cabin (manual)
When the fence doors feature a guard locking system:
1.
Turn the main switch of the bottom platform control box
to the
ON position.
2.
Enter the service lift, close the bottom platform fence
door, and the cabin door.
3.
To go up or down, push and hold the UP or DOWN
button as required.
When the fence doors feature a trapped-key system:
1.
Turn the main switch of the bottom platform control box
to the
ON position.
2.
3.
Open the cabin door, remove the trapped key and open
the bottom platform fence door.
Enter the service lift, close and lock the bottom platform
fence door.
4.
5.
Turn the trapped-key switch to ON , and close the cabin
door.
To go up or down, push and hold the
UP or DOWN
button as required.
WARNING
In the event that the traction wire rope breaks or
traction hoist fails, evacuate the service lift.
WARNING
Before closing the lift door, ensure that your
equipment (i.e. lanyards) is not trapped or tangled with
the closing door and / or with surrounding elements.
WARNING
To prevent the lanyards from tangling with surrounding
elements, keep them properly attached to your body
harness.
WARNING
To prevent the lanyards from tangling with the moving
service lift, do not get close to the hoistway.
To place the service lift on the floor after the bottom
obstruction device has stopped the lift:
1.
Turn the override bottom obstruction device switch
clockwise and hold.
2.
Press the DOWN button until the service lift rests on
the floor, then release.
4.3.6 Operation from outside the cabin (automatic
send configuration)
DANGER
Transportation of persons is forbidden if the operation
is controlled from outside the service lift.
4.3.6.1 Operation by means of the external
operating user control box
Bottom platform
When the fence doors feature a guard locking system:
1.
Turn the main switch of the platform control box to the
ON position (if installed).
2.
Close the cabin door and the bottom platform fence
door.
3.
Push the external UP button.
When the fence doors feature a trapped-key system:
1.
Turn the main switch of the platform control box to the
ON position (if installed).
2.
Close and lock the bottom platform fence door.
3.
Turn the trapped-key switch to ON , and close the cabin
door.
4.
Push the external UP button.
Top platform
When the fence doors feature a guard locking system:
1.
Close the cabin door and the bottom platform fence
door.
2.
Push the external DOWN button.
When the fence doors feature a trapped-key system:
1.
Close and lock the top platform fence door.
2.
Turn the trapped-key switch to ON , and close the cabin
door.
3.
Push the external DOWN button.