23
Robot 185
Operation
General instructions
Before using the machine, read the operating instructions carefully. The user must be familiar with issues
concerning the machine control, operation, and maintenance prior to using the machine.
Inspection before operation
• Check that there is no transport damage to the machine.
• Check that the control and supply cables are not damaged.
• Check the oil level of the hydraulic oil tank.
• Check that the remote control is not damaged.
• Check that the voltage and fuse size are correct, before connecting the supply cable.
• Always connect the machine to a terminal with leakage protection.
No one is allowed to be closer than 6 meters to the machine when the machine is started!
Before starting work, the outriggers must be lowered so that the machine stands firmly.
Safety
Always remember to leave a safe distance around the machine while it is being used.
Cut off the machine’s supply voltage when not in use to prevent accidental use of the machine.
Beware of falling objects and fragments.
In operations where there is a risk that the machine might fall down, never use the cable connection with
the remote control. Use the remote control with radio connection.
Beware of the risk of being crushed when working in confined spaces.
Always use calm and premeditated control movements.
Always wear the necessary personal protective equipment.
Summary of Contents for Robot 185
