AVANT A36279, Operator'S Manual

Page: 9 / 36

9 (36)
DANGER
Risk of asphyxiation - Never operate a loader with a combustion engine indoors.
Using a loader that has a combustion engine (Diesel, gasoline, or LPG) in small confined
spaces or in poorly ventilated areas can cause dangerous levels of Carbon Monoxide
(CO) and Carbon Dioxide (CO
2
) within minutes after starting the loader, resulting in loss
of consciousness and even death. Never operate the loader indoors or in partly
enclosed areas unless you've made sure there is special ventilation system installed.
Large indoor areas, such as warehouses, farm buildings, or factories, may have sufficient
indoor volume to allow temporary use of combustion engines, but it shouldn't be
assumed.
All combustion engines produce, among other exhaust gasses, carbon dioxide (CO
2
) and
can also emit carbon monoxide (CO) that can concentrate quickly to a dangerous level.
Operate the loader only outdoors and far from windows, doors, and vents.
Elevated level of carbon dioxide or carbon monoxide in breathing air can not be noticed
without dedicated measuring equipment. Signs of carbon monoxide poisoning include
nausea, headache, dizziness, drowsiness, and lack of consciousness.
Get fresh air immediately if you notice signs of carbon monoxide poisoning. See a doctor.
Remember to wear proper personal protective equipment:

The noise level at the driver's seat may exceed 85 dB(A) depending on loader
model and operating cycle. Extended exposure to loud noise can cause
hearing impairment. Wear hearing protection while working with the loader.

Wear protective gloves.

Wear safety boots whenever working with the loader.

Wear safety glasses e.g. when handling hydraulic components.
. ..
Safe stopping of the attachment, before going near the attachment:
WARNING
Always stop the attachment following safe stopping procedure before leaving
the driver's seat. Safe stopping procedure prevents all unintentional movements of
the attachment. Note that the loader boom can move down even if the engine of the
loader is turned off. Safe stopping procedure:

Lower the boom and the attachment on the ground.

Shut down the loader engine and lock the parking brake.

Release residual pressure from the hydraulic system; move all hydraulic control
levers to their extreme positions a couple of times.

Prevent starting of the machine, remove ignition key.