16 (36)
2. If your loader is
equipped with the attachment control switch
pack, and
the loader is manufactured
after
2016:
If the loader is equipped with the attachment
control switch pack, and the electric socket
integrated in the multiconnector, the electric
harness of the attachment is connected when the
multiconnector is coupled. Clean both
multiconnectors before connecting the
multiconnector.
The separate cable harness A34731 is not needed
when the loader is equipped with the Attachment
control switch pack.
Attachment control switch pack, loader
manufactured in 2016 or later
3. If your loader is
equipped with the attachment control switch
pack, and
the loader is manufactured
before
2016:
If the loader is equipped with the attachment
control switch pack, and there is an electric socket
near the multiconnector of the loader, connect the
electric plug of the attachment to the socket of the
loader.
The separate cable harness A34731 is not needed
when the loader is equipped with the Attachment
control switch pack.
Attachment control switch pack, loader
manufactured in 2015 or before
.
..
Make sure that electric cables will not get stuck, squeezed, or stretched when the
equipment moves.
With the help of the attachment control switch pack available for the loader, the
attachment control switches are easily accessible at the end of the boom control lever.
More information about the power outlet of the loader can be found in the operator’s
manual of the loader.
Summary of Contents for A36279
Page 2: ...Pallet fork with side shift 2019 1 ...
Page 25: ...25 36 6 4 1 Rated Operating Capacity 500 600 and e series loaders ...
Page 35: ......
Page 36: ......