5 (36)
2.
Designed purpose of use
The AVANT Pallet fork with hydraulic side shift is an attachment that is suitable for use with AVANT multi
purpose loaders that are shown in Table 1. The pallet fork is an excellent tool for handling standard sized
pallets. The pallet fork is an useful attachment all year round for example on construction sites, farms, and
especially at outdoor material handling jobs, where conventional fork-lift trucks may be impracticable. When
operating with the pallet forks, the performance and stability limits of the loader must be observed, especially
when working on inclined terrains.
With the fork side shift mechanism, different pallet sizes can be transported easily and stacked precisely. The
side shift feature is controlled by the auxiliary hydraulic output of the loader, and the operating mode, side shift
or fork width, is chosen by an electric switch. A foldable load backrest extension is fitted as standard, which
must be used when handling loose materials that could fall from a pallet. If lifting and load handling tasks are
frequent, equipping the loader with the boom self levelling and the electric joystick will make repeated lifting
tasks easier.
The maximum load is different for each pallet fork model. Never handle loads that are heavier than the
declared maximum load. The actual operating capacity of the loader equipped with pallet forks depends on
the loader model, and various environmental factors, as shown in this manual. Refer to the operator's manual
of your loader for information about the lift capacity of your loader. In this manual there are load charts that
apply for loaders that are manufactured in 2018 or later.
When operating with the pallet forks, the performance and stability limits of the loader must be observed,
especially when working on inclined terrains. The pallet forks must not be used for lifting persons and it is
prohibited to use the pallet forks as any kind of access platform. The Pallet forks are not designed for any
other use than what is specified in this manual and must not be used for any other purposes than intended.
Using the pallet forks for other purposes than lifting of loads on pallets, or other unit loads that are intended to
be lifted with forks, can damage the fork arms or the frame of the pallet forks. Hanging of loads from the pallet
forks is prohibited. The fork arms must no be used to, for example, wedging of large rocks, or similar tasks
where fork arms are subject to high loads, bending, or impact. The fork arms must also not be bent, heated, or
straightened after damage.
The attachment has been designed to require as little maintenance as possible. The operator can perform
regular maintenance tasks. All repair work can’t be performed by the operator, and demanding repair and
maintenance operations are to be left for professional maintenance. All maintenance work must be done using
proper safety equipment. Spare parts must be identical with original specifications, which can be ensured by
using only original spare parts. A separate spare parts catalogue may be available, consult your Avant dealer.
Familiarise yourself with the manual's instructions regarding service and maintenance. Please contact your
AVANT retailer if you have additional questions about the operation or maintenance of the equipment, or if
you require spare parts or maintenance services.
Table 1 - Pallet fork with side shift - Compatibility with Avant loaders
Avant
220
series 2
225
225 LPG
313S
320S
420
423
520
523
R20
525LPG
R28
528
530
e5
e6
630
R35
635
640
745
750
755i
760i
850
860i
A36279 1100 mm
-
-
•
•
•
•
•
•
The compatibility recommendations are based on the width of the loader, lifting capacity, and adequate
breakout force. The operating capacity of the loader can be determined by using the information shown in this
manual and the load diagram shown in the operator's manual of the loader. Depending on operating
conditions additional counterweights may also be required. For compatibility information with a model not
shown in table above, contact your Avant dealer.
Summary of Contents for A36279
Page 2: ...Pallet fork with side shift 2019 1 ...
Page 25: ...25 36 6 4 1 Rated Operating Capacity 500 600 and e series loaders ...
Page 35: ......
Page 36: ......