AVANT A36279, Operator'S Manual

Page: 23 / 36

23 (36)
Always follow also the operator's manual of the loader to determine the Rated Operating Capacity of each
loader model. A load diagram is presented in the operator's manual of each loader model. With the diagram
the load handling capability of the loader can be evaluated, according to the distance between the centre of
gravity of the load and the front axle of the loader.
In this manual there are the Load charts which show the Rated Operating Capacity for different loader models
that are manufactured during or after 2018. It also applies to other loader models, as long as their axle weight
and principal dimensions are the same.
The Rated Operating Capacity on the load charts apply, when

the standard counterweights of the loader are installed

adding or removing counterweights can change the rated operating capacity significantly

the loader is operated on smooth and calm manner

abrupt movements of the loader or its boom can cause the loader to tip over

swinging of the load can cause the loader to tip over

the ground surface is firm, level, and smooth

recommended tyre pressures are followed.
Always remember that the actual load carrying capacity varies according to operating conditions. Especially
inclined surfaces and uneven ground at the operating area have a great effect. The indicated values apply
only on level, smooth surfaces. Be especially careful when the load sensor indicator is activated, if your loader
is fitted with a load sensor system.
How to read the load charts in this manual:
The Rated Operating Capacity depends on the horizontal distance of the load from the front axle of the loader.
The load charts show the Rated Operating Capacity in different positions of the loader boom, and with the
articulated frame of the loader in straight and fully articulated position.
The load charts in this manual show the Rated Operating Capacity, which is defined as 50 % of the tipping
load of the loader at each position.
This manual shows the Rated Operating Capacity for loaders that are manufactured during or after 2018. It
also applies to other loader models, as long as their axle weight and principal dimensions are the same.
The load chart drawings are illustrations of approximate reach distances and reach
height. The load charts provide an estimation of distances to help to determine rated
operating capacities, they are not precision drawings of distances.
WARNING
Risk of tipping over - Keep the telescopic boom retracted when handling heavy
loads.
Do not extend the telescopic boom, when the load approaches the lifting capacity
of the loader or when the load has been lifted high.