AVANT A36279, Operator'S Manual

Page: 24 / 36

24 (36)
WARNING
Risk of tipping over - Observe the Rated Operating Capacity of the loader.
The
maximum load that can be lifted with a loader, the Rated Operating Capacity, depends on
several factors, such as the following:

The model of the loader and the pallet fork

In this operator's manual the ROC is calculated without the rear guard installed.

If the loader is equipped with other cab option than the ROPS canopy, the ROC
will be higher.

Position and extension of the loader boom

Location of the centre of gravity of the load on the pallet forks

The centre of gravity of the load is either 400 mm or 500 mm from the vertical
part of the pallet fork arm. The distance is shown in the figures in this chapter.

Position of the articulated loader frame

The tables in this chapter show the ROS in straight position of the loader and in
maximum articulation.

Counterweights on the loader

In the values the standard counterweights are taken into account. If weights are
added or removed the ROC will change significantly.

Movements of the loader, its boom, and load

Smoothness of the ground surface and any inclination
Always follow the operator's manual of the loader to determine the Rated Operated
Capacity of each loader model. See more information on the following pages.