AVANT A36279, Operator'S Manual

Page: 20 / 36

20 (36)
.
6.2.1 Side shift and fork width adjustment
Side shift mode and width adjustment mode
Choose the needed operating mode with the switch of the Auxiliary hydraulics control switch pack, or with the
switch of the separate electric harness.
Use the selected mode with the auxiliary hydraulics control lever of the loader, or the corresponding electric
joystick buttons, if available.
Width adjustment mode

When the electric switch is in 0-position, or if the electric harness is not connected, the width
adjustment mode is selected.
Or
Side shift mode

When the electric switch is in 1-position, the auxiliary hydraulics control lever of the loader controls the
side shift
Or

The side shift system is intended to be used to make final adjustments to the position of pallet, not to push
or drag loads that are lowered on the ground.

If the electric system is not connected, only the fork width setting can be used.

Operate the auxiliary hydraulics control lever to check which function is activated.