AVANT 225 Operator'S Manual Download Page 83

Page: 83 / 84

Avant 220/225

Notes - 77, 78, 79

Open/close LPG bottle - 40

Operating instructions - 39

Operation on uneven surfaces,

gradients, and near
excavations - 11

Operator qualification - 6

Parking brake lever - 30

Personal safety and protective

equipment - 11

Rated operating capacity - 29

Rear auxiliary hydraulics

coupling - 35, 56

Rear auxiliary hydraulics outlet

(option) - 30, 35

Refuelling (220/225) - 46

Releasing the residual

pressure of hydraulic
systems - 41, 56

Replacing a gas bottle

(225LPG) - 47

Requirements for attachments

- 51

Reverse buzzer (option) - 35

Run the LPG system empty -

Safe stopping procedure - 41

Safety First - 8

Safety frame (ROPS) and

safety canopy (FOPS) - 12

Safety instructions - 57

Safety of LPG systems - 15

Seat - Seat belt and seat

adjustments - 36

Seat adjustments - 36

Seat heater - 30, 36

Service and maintenance - 8,

Services made - 76

Signs and decals - 19

Spark arrestor (option) - 35

Standard seat - 36

Starting the engine - 40

Steering of the machine - 44

Stopping the engine (Safe

stopping procedure) - 41, 45

Storage - 49

Storage of LPG gas - 15, 16,

Suspension seat (option) - 36

Technical specifications - 23

Tie down points - 48

Tipping load - 28

To start the engine: - 30, 41

Towing (retrieval of the

machine) - 48

Trailer coupling - 34

Transporting instructions and

tie down points - 48

Troubleshoot - 41, 74

Tyre pressure check - 63

Tyres - 25

Using the auxiliary hydraulics -

Warning beacon (option) - 37

Wheel spacers - 25

Wheel weights (optional extra)

- 25

When you want to have a high

pulling force: - 42

Windscreen washer and wiper

- 38

Work lights - 37

Working near powerlines - 14

Working with attachments - 51

Summary of Contents for 225




















































































Search results

Summary of Contents for 225

Reviews:

AVANT 225, Operator'S Manual, Page: 83 / 84

Search results

Summary of Contents for 225

Reviews: