AVANT 225, Operator'S Manual, Page: 40 / 84

Avant 220/225
40
.
Starting the engine
Before starting the engine do the daily checks, (see
" Daily inspections " on page 60). Adjust the seat
and mirrors (if fitted) so that you have a good
working position and unrestricted field of vision from
the driver’s seat. Check that all controls function
correctly. See to it that the operating area is safe.
Read and follow operating and safety instructions.
WARNING
If auxiliary hydraulics is switched
on during starting and there is a
hydraulically operated attachment
on the machine, the attachment
can move suddenly and cause a
dangerous situation.

Make sure that the
auxiliary hydraulics control
lever is in neutral position
during starting.

Do not actuate the
auxiliary hydraulics control
buttons on the joystick (if
fitted when) starting.
WARNING
Prevent unintended movements
of the loader. Keep hands and
feet away from other controls of
the loader while starting.
Do not start the loader in enclosed space - Exhaust
emissions can kill within minutes
DANGER
Exhaust emissions are toxic in
concentrated amounts. Do not
operate the loader in enclosed
spaces or insufficiently ventilated
spaces, i.e. open garage door first.
. ..
Ignition key
. ..
Open/close LPG bottle
Exact instructions of how to open or close the
manual shut off valve of the LPG bottle depend on
the manufacturer of the bottle.

Open the LPG bottle just before starting of the
loader.

Open valve fully, usually by turning 2-3
rounds counter-clockwise.

Keep the shut off valve closed whenever not
actively using the loader.

Do not overtighten.
Close the gas valve carefully, do not
overtighten the valve. Do not open the
valve more than necessary, typically
max. 2-3 rounds, depending on gas
bottle type. Gas bottle valve and the
gas hose normally tighten when
turning clockwise. See markings on
the bottle valve.