AVANT 225, Operator'S Manual, Page: 36 / 84

Avant 220/225
36
.
Seat - Seat belt and seat adjustments
WARNING
The seating capacity of the loader
is one person only. Never carry
passengers on part of the loader or
with any attachment.
Always use seat belt while driving. Clean the seat
belt regularly with a sponge, warm water, and soap.
Use compressed air to clean the buckle.
Replace the seat belt if any damage is seen, or if the
seat belt is exposed to high load or chemicals.
Seat adjustments
Make sure that the seat is properly adjusted for easy
reach to the operating controls and to keep vibrations
transmitted by the seat at minimum. Long term
exposure to vibrations may cause health effects.
Also, as far as possible, keep the operating terrain in
good condition to minimise vibrations.
Standard seat
The distance of the seat from the steering wheel can
be adjusted with the lever which is located under the
front edge of the seat.
Suspension seat (option)
The suspension seat has the following adjustments:
1.
Seat position

The distance of the seat from the steering
wheel can be adjusted with the lever which is
located under the front edge of the seat
2.
Arm rest angle adjustment

The angle of the arm rest can be adjusted by
turning the roller under the arm rest

Adjust the arm rest to position which allows
to use controls of the loader comfortably
while keeping arm on the arm rest.
3.
Suspension adjustment

By turning the knob counterclockwise
suspension gets harder, by turning it
clockwise the suspension gets softer
4.
Angle of the back rest

The angle of the back rest can be adjusted
by pulling the lever
Seat heater
The suspension seat is equipped with an electric
seat heater. Seat heater switch is located by the
steering column and indicator light is on the
multi-function display.