AVANT 225, Operator'S Manual, Page: 53 / 84

Avant 220/225
53
DANGER
Risk of falling objects - Prevent dropping of
attachment

An attachment that has not been completely
locked to the loader may fall on the boom or
towards the operator, or fall under the loader
during driving, causing loss of control of the
loader. Never move or lift an attachment that
has not been locked.

Before moving or lifting the attachment, make
sure that the locking pins are in the lower
position and come through the fasteners on the
attachment on both sides.
Coupling adapters
There are two adapter types to allow coupling of attachments that have smaller quick coupling plate (avant 200
series 1 attachments). Ensure the single quick coupling pin or the locking bolt is fastened securely.
A35590 - Quick coupling adapter A36825 - Bolt-on adapter
CAUTION
Adapter plates reduce lifting capacity - Do not use adapters with heavy loads or
attachments. The adapter plates move the centre of gravity of the attachment further
away from the loader. This increases the risk of tipping over and can limit the use of
heavy attachments.