3.3 Installing the M-Zero obs on the Pier
After the pier has been completely and safely assembled, by simply following the procedure
shown below, it is possible to install the mount on it.
The following procedure is the same for both the M-zero obs standard version and for the M-
zero obs with the Optional Motorized Polar Alignment kit.
The mount fixed flange must be assembled by
using the three
8x35
knobs shown in the picture
on the right.
In order to correctly place the mount on the pier
the three 8x35 knobs must be screwed in the
corresponding holes circled in yellow in the
following pictures, from the bottom side of the
pier top flange, as shown in the pictures below.
©
All Rights reserved
17
Pointing
to North
leg
