The pier leg can be assembled in two different configuration, with a distance of 100° or 120°
between each leg. In both the configuration the leg pointing the north must be assembled by
using the two holes circled in yellow in the pictures below.
Configuration A: leg distance 120°
Configuration B: leg distance 100°
(suggested for latitude higher than 60°)
NOTE:
The configuration B it is suggested for
latitude higher than 60°, with the two rear legs
closer, the basement stability get more reliable.
Note that the two flange composing the pier are equal, but they have two different side. The
flange that must be place on the bottom side of the pier should have the A side toward down
while the flange on the upper side should have the B side toward down. As shown in the picture
below.
©
All Rights reserved
13
