ADVANCED MENU
~
19
~
4) MOTION
BUZZER
Select to enable or disable the sound when any motion alarm is triggered (ON / OFF).
5) ALARM DURATION (SEC)
Press “ENTER” or “
＋
” / “
－
” button to set the duration time of alarm recording in second (5 / 10 / 20 / 40).
7.5 SYSTEM
In this menu list, you can check or change some system settings.
Move the cursor to “SYSTEM”, and press ”ENTER”. You will see a similar screen as the following:
ADVANCE SYSTEM
CAMERA
PASSWORD XXXX
DETECTION RESET
DEFAULT
RESET
DISPLAY CLEAR
HDD
HDD-MASTER-1
ALERT UPGRADE
START
SYSTEM
AUTO KEYLOCK
NEVER
NETWORK LANGUAGE
ENGLISH
BACKUP VIDEO
FORMAT
NTSC
HDD INFO
VERSION
1167-1012-1022-1017
EVENT LOG
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTING
uv
SELECT
s
BACK
t
NEXT
ENTER
The submenu items are described below:
1) PASSWORD
Press “ENTER” to reset the password for accessing the DVR system (ADMIN PASSWORD or GUEST
PASSWORD). You can set the password up to 4 digits.
Note:
Users
who use guest password to access the DVR will be only allowed to view the live streaming
video and sequence display, shift the channel display, and lock keys.
2) RESET
DEFAULT
Press “ENTER” to reset all settings as default, and select “YES” to confirm or “NO” to cancel.
3) CLEAR
HDD
Press “ENTER”, and select “YES” to confirm to clear HDD or “NO” to cancel.
4) UPGRADE
Press “ENTER”, and select “YES” to confirm upgrade or “NO” to cancel.
Note:
To use this function, you need to have the upgrade file saved in a compatible USB flash drive, and
insert it into the USB port at the front or rear panel.
Note:
Do not disconnect the power of your DVR while the upgrade process is in progress, or the DVR
functions may not work normally or be unable to use.
5) AUTO
KEYLOCK
Set the time-out in second after which the key lock function is activated (Never / 10 / 30 / 60).
6) LANGUAGE (Support multi-language)
Press “ENTER” to select the language of the OSD.
7) VIDEO
FORMAT
Here shows the information of the DVR video format (NTSC / PAL).