78
[Avio Settings Location]
The player will use the location that is entered here for its Avio settings (save changes and operate).
By default, the location of all Avio Settings is the SD Card. You may change this option to operate
from a USB data stick or from the p
layer’s internal storage.
HOW TO BACK UP AVIO SETTINGS AND COPY THEM TO ANOTHER PLAYER
When a backup of all Avio Settings should be done from the Internal Storage (when operating from
this location) to the SD C
ard, choose “Internal” as [Backup Source] and “SD” as [Backup Destination].
Then click [Backup now] and all settings will be copied to the SD Card.
To transfer these Avio Settings to another player, insert the SD Card into that player and open its
Web I
nterface. Choose “SD Card” as [Backup Source] and, for example,
“Internal” as [Backup
Destination], when operating from the Internal Storage. Then click [Backup now] and all settings will
be copied from the SD Card to the backup destination. Former Avio Settings that where saved to the
internal storage will be overwritten by this action.
PLEASE NOTE:
If you want to copy Avio Settings or content from one player to another one without changing any
player configuration (e.g. resolution, IP address), please be sure that there is no
UHDPlayerSettings.ini-File on the SD Card that you insert into the player. Otherwise, this
initialization file will overwrite the player’s previous settings.
Please confirm your changes by pressing [Apply Settings] at the bottom of the page.
For further information on how to control the player via Avio, please refer to the Avio manual (in
progress).
