AUX EA Series, Service Manual

Page: 20 / 60

AUX Air Conditioner Service manual
18
The opening state of remote controller:
①
“+” button
This button not only can adjust clock time and the timer
time but also can set room humidity.
Adjusting clock time and timer time
Press it once ,the time increases one minute. Press it for 1 to
3 seconds, time display will increase at the speed of 2min/s.
For 3 to 5 seconds, it will increase at the speed of 10min/s.
For more than 5 seconds, it will increase at the speed of
10min/s.
Setting room temperature and room humidity
Press it once ,the humidity increases 5%.
② “
HEALTH” button
Press this button ,the LCD shows the
“ ”
symbol, the
anion emission function of the air conditioner is started.
Press the button once again, The
“ ”
symbol
disappears, the function is cancelled at the same time.
③ “
SLEEP” button
Press this button ,the LCD shows the symbol, the sleeping function of the air conditioner is started.
After 7 hours of setting this function ,the air conditioner will be off automatically.
Press the button once again, The symbol disappears, the function is cancelled at the same time.
This function is invalid when the appliance under the Fan mode.
④ “
POWER” button or “POWER/QUIET” button
★
When it displays “POWER” button :
Press this button, the fan speed reach the highest , press it again it resume the foregoing fan speed.
★
When it displays “POWER/QUIET” button :
Which enables you to select different operation mode , after each pressing , the operation mode will be
changed . It shows in the following display .
This function is only suitable for frequency variable appliance .
⑤“
HUMIDITY” button
Only under the mode of Heat and Fan, Press this button once , the LCD shows the symbol, the wetting
function of the air conditioner is started. The initial humidity is 60%. Press the ”+” or “-“ button once , the
humidity increases or decreases 5%. The setting range is 30%~60%.