AUX EA Series Service Manual Download Page 16 | Manualshive

Page: 16 / 60

background image

AUX Air Conditioner Service manual

14

1. Press the TIMER button. select the “Timer OFF”. the remote controller display “ ” ; “ OFF ”
displays intermittently.

2. Adjust time through pressing the

or

button.

3. Press the SET button then. the setting is finished.
Remark: The remote controller can be set 24 hours.

★

Sleeping operation mode

1. Press the “ ” button. the sleeping indicator light of indoor unit flashes on.
2. After the setting of sleeping mode. the cooling operation enables the set temperature to increase 1

℃

after 1 hour and another 1

℃

automatically after 1 hour.

3. After the setting of sleeping mode. the heating operation enables the set temperature to drop 2

℃

after 1 hour and another 2

℃

automatically after 1 hour.

4. The air-conditioner runs in sleeping mode for 7 hours and stops automatically.
Remark: Press the MODE button or ON/OFF button. the remote controller clears sleeping mode away.

Model: YK(R)-C/01E

★

Fix batteries

1. Slide open the cover according the direction indicated by arrowhead.
2. Put into two brand new batteries (7#). position the batteries to right electric poles (+&-).
3. Put back the cover.
Make sure to connect the wire to independent power source socket before you use the remote
controller.

Note: the waste battery shall be disposed properly.

★

Automatic operation mode

1. Press the MODE button. select the automatic operation mode.
2. Press the “

” button. you can select fan speed.

The type of H

、

M series:

You can select fan speed from “Power”. “High”. “Low”. “Mute”.
The type of E series:
You can select fan speed from “Auto”. “High”. “Mid”. “Low”.
3. Press the “ ” button. the operation indicator is on. the air-conditioner starts to operate the
Automatic mode.
Press the button again. the air-conditioner stops.

★

Cooling / Heating operation mode (Cold wind type has no heating function)

1. Press the MODE button. select the Cooling or Heating operation mode.

2. Press “ ” or “ ” the button. set the temperature. temperature can be set at 1

℃

difference range

«
...
14
15
16
17
18
...
»

Summary of Contents for EA Series





























































Reviews:

No comments

Related manuals for EA Series

MCM-A200 User Manual (XP)

Brand: Samsung Pages: 12

Brand: Godrej Pages: 50

Brand: York Pages: 12

Brand: Midea Pages: 16

Brand: Vax Pages: 16

Advantage RP52 Series

Brand: Kooltronic Pages: 14

Brand: DeLonghi Pages: 4

Brand: Cellartec Pages: 35

GWH18RC-K3DNA1A

Brand: Gree Pages: 92

Brand: GE Pages: 48

Brand: Daikin Pages: 24

KOOL BREEZE TH-KB13

Brand: Thulos Pages: 19

Brand: Daikin Pages: 36

Brand: Fakir Pages: 56

climaVAIR V 7-050 NW

Brand: Vaillant Pages: 24

Brand: Winix Pages: 12

Brand: Daikin Pages: 15

Brand: Daikin Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands