Autronica AutroMaster ISEMS Installation And Commissioning Manual Download

Page: 34 / 94

Installation

Installation and Commissioning Handbook, AutroMaster ISEMS - Integrated Safety and Emergency Management System,

116-P-AMASTER-INSTCOMM/IGB, Rev. C, 2016-05-20, Autronica Fire and Security

Page 28

3.3 CentOS 5.11 Installation

Insert the CentOS setup CD-ROM and turn on the PC. If the PC
cannot start from a CD-ROM, the PC’s BIOS setup must be changed
so that the CD-ROM is defined as the first unit in the start-up.

The figures used in this chapter are screendumps from version 5.3.
The layouts may vary for CentOS 5.11, but the content is more or less
the same.

3.3.1 Startup

When the PC is turned on, the following is shown:



Press Enter to continue.

Summary of Contents for AutroMaster ISEMS































































































Search results

Summary of Contents for AutroMaster ISEMS

Reviews:

Related manuals for AutroMaster ISEMS

Brands by name

Popular brands

Autronica AutroMaster ISEMS, Installation And Commissioning Manual

Search results

Summary of Contents for AutroMaster ISEMS

Reviews:

Related manuals for AutroMaster ISEMS

Brands by name

Popular brands