Installation
Installation and Commissioning Handbook, AutroMaster ISEMS - Integrated Safety and Emergency Management System,
116-P-AMASTER-INSTCOMM/IGB, Rev. C, 2016-05-20, Autronica Fire and Security
Page 5
3. Installation
To install AutroMaster ISEMS on a PC make sure that you have the
following software.
Linux boot floppy and Linux CD based on CentOS installation CD
(alternatively DVD).
AutroMaster ISEMS distribution on CD’s.
3.1 Preparing to Install the System
AutroMaster ISEMS requires CentOS 5.6. It can either be downloaded
from the Internet or you can buy it from Autronica Fire & Security AS. If
you want to download a distribution, make sure that you download a
distribution in ISO format. The ISO format is one large file, which can
be loaded onto your CD burner program and the Linux DVD/CDs can
be burned.
Every Linux distribution contains complete software for network
communication, graphical user interface, a complete development
environment, and many different server softwares.
This chapter deals with 5.11.
Before the installation is carried out it is important to write down the
following key information about the PC:
Type of the graphical board installed and the available memory.
Type of mouse and where the mouse is connected.
Monitor information, including; type, resolution, horizontal and
vertical refresh frequencies. The standard resolution is 1280x1024,
therefore find the vertical frequency for this resolution in your
monitor manual.
Type of the network card, if the computer is to be connected to a
network or AutroSafe.
Make sure that all necessary CD’s (the Linux CD and AutroMaster CD)
and the information about the hardware are available.
Important!
Summary of Contents for AutroMaster ISEMS
Page 8: ......
