Autronica AutroMaster ISEMS, Installation And Commissioning Manual

Page: 43 / 94

Installation
Installation and Commissioning Handbook, AutroMaster ISEMS - Integrated Safety and Emergency Management System,
116-P-AMASTER-INSTCOMM/IGB, Rev. C, 2016-05-20, Autronica Fire and Security
Page 37

To change the network information for the selected network
interface, click
Edit .

Check that Enable Ipv4 support is ticked off.

Select Manual configuration.

Type the IP address and Netmask (for example,
192.168.1.1/255.255.255.0).

Disable Ipv6 support (remove tickoff mark).

If several network cards is used in the PC, the procedure has to be
repeated for each card.

Under the hostname, make sure that manually is selected, and type
the PC’s hostname, for example, “am5000”.

To continue, click Next .