Autronica AutroMaster ISEMS Installation And Commissioning Manual Download

Page: 46 / 94

Installation

Installation and Commissioning Handbook, AutroMaster ISEMS - Integrated Safety and Emergency Management System,

116-P-AMASTER-INSTCOMM/IGB, Rev. C, 2016-05-20, Autronica Fire and Security

Page 40

3.3.15 Select the Software to be Installed



Tickoff all packages in the upper part of the window.



Select Customize now.



Click

Next

to continue.

All packages are installed, except for Vitualization, Clustering and
Cluster storage.



Select the first main package in the left window (which is Desktop
Environments).

All subpackages for the selected package will appear in the right hand
window.



For each subpackage, right-click and select

Select all optional

packages



Repeat this for all main packages.



Click

Next

to continue.

Summary of Contents for AutroMaster ISEMS































































































Search results

Summary of Contents for AutroMaster ISEMS

Reviews:

Related manuals for AutroMaster ISEMS

Brands by name

Popular brands

Autronica AutroMaster ISEMS, Installation And Commissioning Manual

Search results

Summary of Contents for AutroMaster ISEMS

Reviews:

Related manuals for AutroMaster ISEMS

Brands by name

Popular brands