Chapter 5:
Configuring IntelliSight Devices
Autoscope IntelliSight User Guide
©2022 Image Sensing Systems Inc.
5-14
4. For zones not already designated as right or left turn, and if vehicles can exit
the zone by making a right or left turn, do the following.
a) Right-click on the zone.
b) Under
Turn Direction
, select the appropriate check box.
c) Click elsewhere on the image.
5. Modify zone positions as required.
6. To change the zone description, highlight the description in the
E
ASY
S
ETUP
section and type a new one.
Any number of alphanumeric and special characters can be used.
7. Assign conditions, actions and video overlays as required.
NOTES:
•
By default, the vehicle presence condition is selected for each zone. In
addition, green is selected for the zone display color when a vehicle is
detected and gray when no vehicle is present in the zone. There is no
default output assigned.
•
For each selected condition (vehicle and bicycle presence) an output
must be assigned unless the Set Output action is removed in the
section.
•
The
Show Video Overlay
check box is used to display overlays only when
video is playing. The
Show Setup Controls
check box is used to display
overlays on the Zone Setup screen for both static images and video.
•
After all zones are defined and configured, it is recommended that the
configuration be archived (see
).
8. When complete, click
A
PPLY
C
HANGES
.
Changes go into effect immediately and can be viewed live.
