Chapter 5:
Configuring IntelliSight Devices
Autoscope IntelliSight User Guide
©2022 Image Sensing Systems Inc.
5-43
Changing Zone, Condition and Action Descriptions
The descriptions of all zones, conditions and actions can be changed by the
user. To change any description, highlight it and type a new description. Any
number of alphanumeric and special characters can be used; however the
displayed string is limited to the size of the Supervisor screen. The results of
description changes are dependent on the order in which changes are made.
Zone Descriptions
Zone descriptions can be changed in either the Easy Setup, Zones Explorer or
Actions Explorer sections. Changes made in one section automatically appear in
the other section. In addition, the zone description change also appears in the
default condition description if the condition description has not been changed.
The default descriptions are dependent on how the zone is created. If the zone is
created by selecting Add Zone, the default description is “Zone.” If the zone is
created by selecting Zones From Calibration, the defaults are as follows.
Condition Descriptions
Condition descriptions can be changed in the Zones Explorer and Actions
Explorer sections. Changes made in one section automatically appear in the
other section. The default descriptions for the two conditions are:
Vehicle Presence in xxx
Bicycle Presence in xxx
The xxx is the description of the zone to which the condition is associated. When
using the default condition descriptions, if the zone description is changed, the
condition description is automatically updated to reflect the change. However, if
the condition description is changed first and then the zone description second,
the condition description will not be updated with the new zone description.
Action Descriptions
The two default action descriptions are Display Zone and Set Output. The Display
Zone description can only be changed in the Zones Explorer. The Set Output
action description can be changed in the Zones Explorer and Actions Explorer
sections. Changes made in one section automatically appear in the other
section.
Selection
Default Descriptions
No Turn Lanes
Through Lanes
Left Turn Lane
Through Lanes and Left Turn Lane
Right Turn Lane
Right Turn Lane and Through Lanes
Left and Right turn lanes
Right Turn Lane, Through Lanes and Left Turn Lane
Preserve all lanes
Zone 1, Zone 2 and Zone 3
