Autonics ARD Series, User Manual

Page: 88 / 113

8 Unit parameter setting
88 © Copyright Reserved Konics Co., Ltd.
(6) Analog Generic Status
Analog Generic Status is able to allot as Produced I/O data by Configurator or
Explicit message.

Assembly Instance ID: 107
 Data type: Byte, Data size: 5Byte
15 0
Analog Status of Input point 1 Analog Status of Input point 0
Analog Status of Input point 3 Analog Status of Input point 2
- Generic Status
(7) Analog Data+Analog Status
Analog Data1+Analog Status is able to allot as ProducedI/O data by Configurator or Explicit
message. It is also able to allot to Analog Input Value, Peak Value, Bottom Value by
attribution setting.
 Assembly Instance ID: 108

Default value: 0
 Set range: 0 to 2(Analog Input Value: 0, Peak Value: 1, Bottom Value: 2
 Data type: Byte, Data size: 12Byte
15 0
Alloted value for Analog Data1 of Input point 0
Alloted Low Byte for Analog Data1 of Input
point 1
Analog Status of Input point 0
Analog Status of Input point 1
Alloted High Byte for Analog Data1 of Input
point 1
Alloted value for Analog Data1 of Input point 2
Alloted Low Byte for Analog Data1 of Input
point 3
Analog Status of Input point 2
Analog Status of Input point 3
Alloted High Byte for Analog Data1 of Input
point 3

Set range: Disable
↔
Analog Data1
↔
Analog Data2
↔
Generic Status
↔
Analog
Status
↔
Analog Data1+Analog Data2
↔
Analog Generic Status
↔
Analog
Data1+Analog Status

Factory default: Analog Data1