DPM3 User Manual, 1st Edition
User Manual - DPM3 Series Panel Meters
24
Logic functions menu
-
-
-
-
-
-
-
-
-
ENTER:
Vertical displacement.
UP:
Changes active digit.
SHIFT:
Horizontal displacement.
Programming Key Pad
Table of programmable functions
•
Nº:
Number to select the function.
•
Function:
Function name.
•
Description:
Description and characteristics of the function.
•
Activation by:
Falling edge:
the function is activated applying a falling edge to the
corresponding pin with respect to common.
Low level:
the function will remain activated as long as the corresponding
pin is held at a low level.
No.
Function
Description
Activation By
0
Deactivated
None
None
1
TARE*
Adds the current display value to the tare memory and sets the display
to zero.
Falling edge
2
TARE RESET*
Adds the tare memory to the display value and clears the tare memory. Falling edge
3
LIST RESET*
Performs a reset of the peak (MAX.) or the valley (MIN.), depending on
selection.
Falling edge
4
SEE LIST
Displays peak value (MAX.), valley value (MIN.), tare value, net value
(NET) or gross value (GROSS) depending on selection.
Low level
5
Not Used
6
HOLD
Freezes the display while all the outputs remain active
Low level
7
BRIGHTNESS
Changes the display brightness from Hi to Low
Low level
8
DISPLAY COLOR
Changes display color (green, red or amber)
Low level
9
SETP PROG/TARE
Configures Setpoints or Tare depending on Selection List (TARE, SET1,
SET2, SET3 and SET4)
Falling edge
10
Not Used
11
KEYB. EMULATION
Emulates key pad (Input 1=ENTER, Input 2=SHIFT, Input 3=UP)
Low level
12
Not Used
* Only with mode TARE 1 and TARE 3
