DPM3 User Manual, 1st Edition
User Manual - DPM3 Series Panel Meters
26
Lock-out menu diagram
The following figure shows the lock-out menu. The access to this menu is accomplished from
the run mode by pressing the
ENTER
key for 3 seconds, until the
“CodE”
indication appears.
The instrument is shipped from factory with the following default code:
“0000”
. Once this
code is entered, the
LISt
indication will appear, from which lockout parameters will be entered.
Accessing the
“CHAnG”
menu a new personal code is entered. Write down and keep this code
in a safe place
(Do not count on your memory)
.
If an incorrect code is entered, the meter will return automatically to the run mode. Total lockout
programming is achieved by changing the
“totLC”
variable to 1, changing it to 0, will lead to
the selective lockout of the programming variables. Programming each one of the parameters
to 1 will active the lockout, if they are set to 0 programming will be accessible. Though the
programming is locked out, it remains possible to visualise the current programming.
The
“StorE”
indication informs that the modifications effectuated have been stored correctly.
(total lock)
- - - -
(param. list)
=Code?
Hold 3 sec
ENTER
Yes
----?
Next
Page
ENTER:
Vertical displacement.
UP:
Changes active digit.
SHIFT:
Horizontal displacement.
Programming Keys
(Bottom view)
Lock-out menu diagram continued
