Appendix C
Error Codes
Appendix G
Allen–Bradley Setup
G–5
Allen–Bradley Setup
D0–DEVNETS DeviceNet Slave
Module User Manual, Rev A
The DeviceNet Interface
Configuration window will
appear briefly.
This window will appear for
you to setup the pass
through port.
Be sure that you select the
proper slot where the
scanner module is located.
If this does not match, you
will need to reconfigure the
I/O in RSLogix.
11. Type in a name for the
driver, then click
OK
.
This window will appear
indicating that both drivers
are Running.
Summary of Contents for D0-DEVNETS
