Appendix C Error Codes
Appendix G
Allen–Bradley Setup
Allen–Bradley Setup
G–14
D0–DEVNETS DeviceNet Slave
Module User Manual, Rev A
If the node that you want is not
in the Scanlist, it needs to be
moved to the list.
8. Highlight D0–DEVNETS
9. Click the right arrow.
Now that D0–DEVNETS is in
the list, be sure that it is
selected.
10. Click
Edit I/O
Parameters
.
11. Set the
Rx Size
and the
Tx
Size
to match the polled
data size for the number
of I/O bytes (refer to
tables in Appendix C).
12. Click
OK
.
Refer to page G–18 (Set
Class Instance Attribute) if
the total number of Rx and
Tx bytes are not known.
Summary of Contents for D0-DEVNETS
