Owner Installation Instructions
Dual Gate Controller DCB-05
7
Transmitter Management Flexibility
Whenever a large number of transmitters are used, managing those transmitter effectively
is of great importance. The Dual Gate Controller provides many features which enhance
transmitter management. Transmitters can be listed by store location, group number,
serial number or I.D. Label. Tools are available which allow transmitters to be Replaced,
Deleted and Edited. A quick transmitter code set feature is provided which allows the
button functions of an existing transmitter to be copied to all transmitters to be coded.
This feature allows many transmitters to be coded without the need for the installer
to touch any console buttons during the coding process. When all transmitters
are coded, a transmitter storage report can be generated which can be easily
transferred to a P.C for record keeping. Access logging can also be implemented
by enabling the generation of a transmitter activity report each time the receiver
is triggered. During installation a handheld transmitter can be used to set gate
travel limits, allowing the installer to closely monitor the gate’s position and stop
points instead of having to be within arms reach of the console.
Ease of installation
During installation the controller will automatically detect the wiring type and the
number of motors connected. In addition the installer is guided through the steps
of installation by fi rst adjusting the travel limits (under motor power). This can be
done via the console keypad or via a hand held transmitter (this allows the installer
to closely observe and control the gates movement from any position rather than
having to be within arms reach of the console). Once the limits have been adjusted,
the controller will automatically learn the travel characteristic of each gate.
Password protection
All operating parameters and transmitter storage can be protected from being changed
by unauthorised personnel by an optional password protection feature.
Status indication
The status of the Gate Controller can be determined at any time by observing the screen of the
console. When the MAIN SCREEN is displayed, the current position of the gate or the result of the last
movement can be viewed. The display will also show the count down progress of the Auto-Close timers.
Any active input will also be displayed along with the state of various features such as periodic service, vacation
mode, etc.
Control of lock and lights
The incorporated controller has two programmable outputs which can be selected to operate an electric lock
and warning or courtesy lights. The timing of these outputs can be adjusted to suit your needs. In addition a
button on a remote control can be coded to operate the Light output.
Smart Solar ™ and Battery Backup Compatibility
The Dual Gate Controller can be fi tted with optional Smart Solar™ or Battery Backup kit to provide operation
during power outages or at unpowered sites.
