Owner Installation Instructions
Dual Gate Controller DCB-05
23
Vacation mode
Vacation mode can be turned on or off using
this parameter.
Battery/solar mode
The Dual Gate Controller can be instructed to turn
off the Battery Backup facilities so that the Dual
Gate Controller can be shut down without having to
disconnect the Battery Backup system.
Password protection
The password feature enables all parameters and
confi guration settings to be protected unless a
password is entered. When this feature is turned on
the user is requested to enter the desired password
to be used. The password protection feature has a
time-out that expires after 60 seconds of inactivity.
Alternately the user may log out manually by pressing
exit when the main screen is displayed.
Open input polarity
The OPN input is normally confi gured for N/C operation.
This parameter allows its operation to be changed to N/O.
Parameter
Min
Max
Default
Menu
No.
PE INPUT RESPONSE MODE Sets the PE response
mode. Options are OPEN and CLOSE cycles stop, Close
cycles stop or Close cycle reverse
NOT USED
OPN & CLS stop
CLS to stop
CLS to reverse
CLS to
reverse
7.1
PED INPUT = SWIPE MODE Selects PED input functions
as pedestrian access swipe input
Off On
Off
7.2
REMOTE CODE ENABLED
Selects remote transmitter coding function
Off On
On
7.3
VACATION MODE
Selects vacation mode - disables remote control
Off On
Off
7.4
BATTERY/SOLAR MODE
Selects Battery Backup/Solar operation
Off On
On
7.5
PASSWORD
Selects password protection for all changes
Off On
Off
7.6
TX # GROUPING
Selects transmitter number group display format.
Off
Off
7.7
OPN INPUT N/C OPERATION
Selects operating polarity of OPN input
Off On
Off
7.8
STP INPUT N/C OPERATION
Selects operating polarity of STP input
Off
Off
7.9
OUTPUTS 1&2
Selects function of OUTPUT1 and OUTPUT2
OUTPUT1=
LOCK
OUTPUT2=
LIGHT
OUTPUT1=
LIGHT
OUTPUT2=
LOCK
OUTPUT1=
LOCK
OUTPUT2=
LIGHT
7.10
OPN INPUT = 2ND PE
Open input acts as 2nd PE input
7.11
FAULT AUTO RESET
7.12
Dual Gate Controller adjustments
(cont.)