Automatic Products Showcase 748, Operating Manual

Page: 15 / 107

APi 748 V1.1 406 2.8 77500001
Back
Shutdown and Timed Lockout
The Shutdown option can also be set to ON. This
will cause the 748 to immediately go into
shutdown when the coin door is closed. To restore
the machine to vend mode, the coin door must be
opened and the Shutdown option must be turned
OFF. This can be used to prevent sales or turret
activity when service activities are in process.
The 748 supports a TIMED LOCKOUT feature
which may be programmed to prohibit sales at
specified times during the week using a scheduled
event.
When the 748 is shutdown due to such a
scheduled event, the machine lights will be off and
a message will be displayed on the message
center showing “MACHINE SHUTDOWN UNTIL
xx.yy”, where xx.yy is the time when the machine
will go back into service. During programmed
shutdown, the refrigeration and health control
systems continue to work normally.
The shutdown option must be set to “PER SCH”
and a shutdown event must be programmed in the
event schedule.
Multiview
When Multiview is turned on, the turret is rotated
three positions every three minutes of idle time.
Multiview is used to draw attention to the 748 and
to periodically move the food in the refrigerated
compartment to provide more uniform
temperature control.
Multiview can be turned on or off or can be
scheduled to turn on and off at specified times of
the day using a scheduled event.
EXCEPTION: If the operating temperature range
is set for 1°C - 3°C, the multiview option
cannot
be
disabled or turned off.
Discount
Three different discounts may be programmed.
Discount amounts will be subtracted from the
regular price whenever that discount becomes
active. The prices on the price display will reflect
any active discount. If the discount amount is
greater than the price of a selection, the price of
that selection will be 0.00. To use discounts, the
Discount option must be set to “PER SCH”, a
discount amount must be set, and a discount
event for that discount must be programmed in
the event schedule.
For example: Discount 1 is set to $0.10 and a
scheduled event turns on Discount 1 on Friday at
17:00 then off on Saturday at 22:00. All displayed
on the price display between those times will have
$0.10 subtracted from them.
Sell By Shift
Sell By Shift allows reserving selections for sale at
a specific time. Each compartment can be
individually reserved for sale on specific days of
the week and hours of the day.
When someone tries to open the door to a
selection that is reserved for a nonactive shift, the
display will show “RESERVED SELECTION”.
Pricing
Three different prices (price schedules) may be
set for each selection compartment. If the pricing
option is set to “NORMAL”, only price schedule 1
is used. If the pricing option is set to “PER SCH”,
then the pricing schedule can be programmed
using scheduled events. Any time not defined by a
specific schedule will default to price schedule 1.
Show Sold
With this option ON, when a “sold” compartment is
in the vend position, its corresponding price
display will show “SoLD” instead of the item’s
price. With the option set to OFF, prices will be
shown for all compartments in the vend position
even if the item has been sold.