Automatic Products Showcase 748, Operating Manual

Page: 34 / 107

APi 748 V1.1 406 3.17 P/N 77500001 Back
Pressing the [5] Key from “Service” the
display will prompt “Cash System Type”
KEY [5]
Cash System Type
– This menu allows selection of
the cash system used in the 748. The supported
cash system types are: DUMB, MDB, and EXEC
(Protocol A). Both the MDB and DUMB cash system
types allow additional options to be set. Using key
[5] or [6] will advance to the options available for the
selected cash system type.
DISPLAY: “CASH SYS TYPE -DUMB”
Note: If you choose Dumb go to page 3.20
[1] Toggles available choices
[5] Saves choice and proceeds to the next option for
the selected cash
system
[6] Proceeds to the next option for the current cash
system without saving
[0] Saves choice and returns to the top of the service
mode
[RESET] Returns to the top of the service mode
without saving
NOTE: When reviewing the cash system options, key
[6] may be used to quickly view one option after
another without having to SAVE each option.
MDB CASH SYSTEM OPTIONS
Coin Mech –
If a coin changer is connected, set to
YES, otherwise set to NO.
DISPLAY: “COIN MECH YES”
Key Function
[1] Toggles between YES and NO
[5] Saves choice and proceeds to the next option
[6] Proceeds to the next option without saving
[0] Saves choice and returns to the top of the service
mode
[RESET] Returns to the top of the service mode
without saving
Tube Sensing –
An MDB coin changer will
automatically keep track of coins in the tubes. To use
this feature, set Tube Sensing to AUTO. Due to the
design of some coin changers, they cannot report the
exact number of coins in the coin tubes. To ignore
the coin tube counts
reported by the coin changer, set Tube Sensing to
MAN (manual).
This will allow the 748 to keep track of coins
deposited and dispensed from the coin changer.
NOTE:
Some coin changers will not dispense a
coin even when commanded to do so. In this
case, the tube counts in the 748 will become
corrupt and a customer may get short changed.
Before using the manual tube sensing option, be
sure the coin changer will operate its dispensing
mechanism regardless of the number of coins in
the tube, especially when the tube is almost
empty.
DISPLAY:
“TUBE SENSING MAN”
[1] Toggles between MAN and AUTO
[5] Saves choice and proceeds to the next option
[6] Proceeds to the next option without saving
[0] Saves choice and returns to the top of the
service mode
[RESET] Returns to the top of the service mode
without saving
Accept Small Coins –
Some MDB coin changers
are set up to accept coin values smaller than the
lowest value coin stored in a coin tube. Setting
this option to NO will cause the coin changer to
reject these smaller value coins. Set this option to
YES if small coins should be accepted. Prices are
set based on the lowest value coin stored in a
coin tube. If small coins are accepted, it is
possible to have leftover credit that cannot be
returned to the customer.
DISPLAY:
“ACPT SMALL COINS NO”
[1] Toggles between YES and NO
[5] Saves choice and proceeds to the next option
[6] Proceeds to the next option without saving
[0] Saves choice and returns to the top of the
service mode
[RESET] Returns to the top of the service mode
without saving.
NOTE: Be sure to power the 748 OFF
then back ON after SAVING a cash
system type even if it was not changed.