AUTOFLAME MM10004, Manual

Page: 54 / 60

7 Installation /
安装
Autoflame Servomotors Guide / Autoflame
伺服电机指南
Page | 54
7.4. Servomotor Feedback Voltage /
伺服电机反馈电压
In applications where the servomotor is not positioned close to the display then it is possible to measure the
feedback voltage from the servomotor in order to ensure that 0.0° is displayed. By testing the DC voltage
between the blue and green wires (wiper and 0V) on the servomotor low voltage terminals this will read 0.21V
DC when the reading on the display is 0°. The same can be done for when the servomotor is at 96.0° where
the voltage will be 3.6V.
在应用中，在伺服电机不是靠近控制器，是可能测量伺服电机上的反馈电压，以确保
0.0
°的显示。通过测试
伺服电机低压端子上的蓝线和绿线
(W
线和
0
伏线
)
之间的直流电压，当屏幕上的读数为
0
度时，将测量到
0.21
伏直流电。 当伺服电机处于
96.0
℃时，电压为
3.6
伏。