AutoDAB Connect User Guide
23
Note:
Switching to the AutoScan mode does not change the current FM transmitting
frequency as it remains the same as before the switch.
Switching to the AutoScan mode, it disables the AFC function.
To Enable RC Beep Tone
When you enable RC beep tone, AutoDAB Connect will respond with a beep tone, each
time an operation is performed on the remote control.
1.
In the menu function, rotate the
Rotary Knob [
◄] [►]
until the screen shows
《
RC BEEP
》
.
2.
Press the
Rotary Knob
to enter RC beep tone selection operation.
3.
Then you can rotate the
Rotary Knob [
◄] [►]
until the screen shows
《
BEEP
ON
》
to enable the RC beep tone.
4.
Or you can rotate the
Rotary Knob [
◄] [►]
until the screen shows
《
BEEP
OFF
》
to disable the RC beep tone.
5.
Finally, press the
Rotary Knob
to set the RC beep tone, screen will then show
《
DONE
》
.
Note:
The default setting is OFF.
To Set Antenna Power
For AutoDAB Connect to work with the active antenna, the antenna power must be set
to ON; for AutoDAB Connect to work with a passive antenna, the antenna power must
be set to OFF.
1.
In the menu function, rotate the
Rotary Knob [
◄] [►]
until the screen shows
《
ANTENNA
》
.
2.
Press the
Rotary Knob
to enter Antenna Power selection operation.
3.
Then you can rotate the
Rotary Knob [
◄] [►]
until the screen shows
《
ANT
ON
》
to set the Antenna Power On.
4.
Or you can rotate the
Rotary Knob [
◄] [►]
until the screen shows
《
ANT OFF
》
to set the Antenna Power Off.
5.
Finally, press the
Rotary Knob
to set the Antenna Power.
Note:
The default Antenna Power setting is OFF.
