AutoDAB Connect User Guide
6
Securing AutoDAB Connect, Step by Step
To secure AutoDAB Connect in your chosen mounting location using the supplied dual lock
tapes and/or screws, do the following:
1. Locate the positions on the back of AutoDAB Connect and the chosen mounting
location (e.g.
in the middle and under the car’s glove compartment) where you want to
apply the dual lock tapes.
2. Clean both surfaces of the
‘affix tape’ positions on the AutoDAB Connect and the
chosen store location, with alcohol if available and wipe dry before you start.
3. Remove one side of the backing from each of the two pieces of dual lock tapes, and
adhere the tapes onto the back of the AutoDAB Connect in the marked positions
above.
4. Remove the other side of the backing and adhere the AutoDAB Connect to the chosen
mounting location with the cables and connectors to the back.
5. Carefully, remove the AutoDAB Connect from the mounting location with dual lock
tapes separated, so that AutoDAB Connect and mounting location each has 2 half
pieces of the tapes.
6. Apply pressure evenly to all 4 half pieces on the AutoDAB Connect and the mounting
location, so that the tapes adhere to both surfaces securely.
