AutoDAB Connect User Guide
20
MENU SETTINGS
You must press the
Rotary Knob
then
MENU
button to enter the menu function, rotate the
Rotary Knob
[◄] [►]
to select a menu setting, and then press
the
Rotary Knob
to confirm
the selection.
To Reset FM Transmitting Frequency Setting
This function allows you to reset the FM transmitting frequency to the default setting
FM 87.6MHz.
1.
Reset A
utoDAB Connect’s FM transmitting frequency by either way below:
a.
Enter the menu function, the screen will show
《
87.6MHz
》
. Then, Press
the
Rotary Knob
to reset FM transmitting frequency to 87.6MHz.
b.
Press and hold
BACK
twice in succession to reset FM transmitting frequency
to 87.6MHz.
2.
Press
FM preset of your car radio to the frequency 87.6MHz if you have
previously saved for DAB reception. Otherwise, tune the car radio to FM
frequency 87.6MHz manually.
To Enable DLS/DL+ Display
When you enable DLS/DL+ Display, the radio will show DLS information such as song
titles, music types and news or traffic updates from the station if DLS is being received,
or DL+ information, song track, song artist if DL+ is being received.
1.
In the menu function, rotate the
Rotary Knob [◄] [►]
until the screen shows
《
RADIOTXT
》
.
2.
Press
the
Rotary Knob
to enter radio text selection operation.
3.
Then you can rotate the
Rotary Knob [◄] [►]
until the screen shows
《
ON
》
to
enable the DLS/DL+ display on radio.
4.
Or you can rotate the
Rotary Knob [◄] [►]
until the screen shows
《
OFF
》
to
disable the DLS/DL+ display on radio.
5.
Finally, press the
Rotary Knob
to set the DLS/DL+ display. The screen will then
show
《
DONE
》
.
Note:
The default DLS/DL+ setting is ON.
