AutoDAB Connect User Guide
8
OPERATION CONTROLS
In-Car Audio System LCD Display
The AutoDAB Connect unit is operated by using a remote control. The system messages
from the remote control operation are converted to RDS text and displayed as 8 characters
displayed on your car radio.
Below is a list of AutoDAB Connect system messages displayed on the car radio, while
operating with the remote control:
Messages
Description
DABRADIO
Displays after AutoDAB Connect is powered on.
station name
Displays the 8-character short service name of the DAB station.
TUNING
Indicates tuning a DAB station is in progress.
RESETING
Indicates performing a DAB reset or factory reset is in progress.
DONE
Confirms completion for certain system operation, i.e., set a DAB preset
mode.
RETUNING
Indicates FM transmitting frequency is being retuned to a new frequency.
TO
frequency
Indicates AutoDAB Connect is changing FM transmitting frequency to a new
frequency from a manual setting.
AF
frequency
Indicates AutoDAB Connect is changing FM transmitting frequency to a new
frequency from the AFC function. Other than pressing and holding the
BACK
key, any other remote control keys pressed are ignored before the change is
completed.
POWEROFF
Displays after AutoDAB Connect is turned off (into the standby mode).
RC LOW
Indicates remote control
’s battery is low, battery change is due.
