AutoDAB Connect User Guide
21
To Enable AFC (Automatic Frequency Change)
If your car radio does not have AF feature then please refer to
To Enable AutoScan.
It may become necessary to change the FM transmitting frequency as you drive
into
an area where the FM frequency transmitted by AutoDAB Connect is used by an FM
broadcaster. AutoDAB Connect has an AFC function that allows you to continuously
listen to DAB programs through your car radio system without the need to change the
FM frequency manually. (Subject to car radio compatibility)
To perform this AFC function, your car radio must have AF (Alternative Frequency)
feature and the AF feature of your car radio must be activated. When the AFC function
of AutoDAB Connect is enabled and the AF feature of your car radio is activated, your
car radio will tune to an unused FM frequency automatically when you drive into an
area where the original FM frequency for DAB is no longer available.
Furthermore, there are two AFC modes, AFC_H (High Sensitive) & AFC_L (Low
Sensitive). While in AFC mode, AutoDAB Connect will detect and determine if a
frequency change is necessary constantly. Set AFC_L mode, if you experience the
FM frequency is being changed too often, and set AFC_H mode, if you often hear static
noise and the FM frequency is not changed.
By default AutoDAB Connect is already set to use AFC_H mode; however, if you want
to change or return to AFC mode, do the following:
Setting on AutoDAB Connect
1.
In the menu function, rotate the
Rotary Knob
[
◄] [►]
until the screen shows
《
LINKMODE
》
.
2.
Press the
Rotary Knob
, and then rotate the
Rotary Knob [
◄] [►]
until the
screen shows
《
AFC_H
》
or
《
AFC_L
》
.
3.
Press the
Rotary Knob
, the AFC function is now enabled and the AutoDAB
Connect is operating in the AFC mode.
Setting on Car Radio
1.
Enable the Alternative Frequency feature of your car radio (Consult your car radio
manual or the car dealer if your car radio has the AF feature, and how to enable
AF feature).
Note:
If your car radio does not have AF feature, the AFC function must not be
enabled, and refer to
To Enable AutoScan.
If the AF feature of your car radio and A
utoDAB Connect’s AFC function are
not compatible, the AFC function must not be enabled; instead, refer to
To
Enable AutoScan.
The system default is AFC_L mode enabled.
If you hear static noise or a FM program and before AFC tunes to a clear
