AutoDAB Connect User Guide
26
TROUBLESHOOTING
Please read this user manual carefully before using the AutoDAB Connect In-Car DAB
Adapter. If you still have difficulties to use this unit, this section gives some of the most
likely solutions to the problems you might have.
I cannot find any DAB stations.
Ensure that DAB coverage exists in your area. Please visit www.worlddab.org or
www.digitalradionow.com to check for DAB coverage.
I can find DAB stations, but I cannot get any sound.
Make sure that the car radio is not mute; check the volume settings of the car radio.
I forget the FM transmission frequency setting of AutoDAB Connect.
Press
LINK
key the screen will show the current FM Transmitting frequency.
I cannot hear DAB program when I start up my car and turn on the car radio.
Check the following:
1. Follow the instruction on the section
STARTING UP THE SYSTEM
to initialize the
FM transmitting frequency on AutoDAB Connect and the car radio.
2. Make sure AutoDAB Connect is not in the Auxiliary mode, please refer to
To Set
the Auxiliary input mode
to check and return to DAB mode.
While listening to a DAB station, I lost reception suddenly and hear static noise
or a FM program
1. Check if A
utoDAB Connect’s station information shows
《
POOR SIG
》
or
《
UNAVAIL
》
, if so, you may be leaving the signal coverage area, please refer
to
To Listen to the DAB stations
to select another station. Also, the station may be
unavailable temporarily as you drive into a tunnel.
2. If AutoDAB Connect is in AFC mode, the FM transmitting frequency for AutoDAB
Connect and the car radio listening Frequency maybe out of sync. To reset them,
do the following:
a) Reset to 87.6MHz
Operating on Car Radio
Press
FM preset of your car radio to the frequency 87.6MHz if you have
previously saved for DAB reception. Otherwise, tune the car radio to FM
frequency 87.6MHz manually.
