AutoDAB Connect User Guide
11
STARTING UP THE SYSTEM
1. Turn on your in-car audio system.
2. Enable the AF function on your car radio if it is equipped (Consult your car radio
manual or the car dealer if your car radio has AF feature, and how to enable AF
feature).
3. Tune the car radio
’s FM frequency to FM 87.6MHz, which is the same as AutoDAB
Connect’s default FM TX frequency.
4. Start AutoDAB Connect by plugging the cigarette-lighter power plug into the
cigarette lighter, the audio system display will show
《
DABRADIO
》
.
5. AutoDAB Connect will perform a Scan of DAB stations automatically.
6. If FM 87.6MHz is already used by a FM broadcaster or the station is noisy, change
the initial FM TX frequency as below:
Operating on AutoDAB Connect
Press and hold
LINK
for 3 seconds, AutoDAB Connect will set a new and
clear frequency to transmit the FM signal.
Operating on Car Radio
Use auto scan function of your car radio to search for an FM broadcast
having program service name
《
DABRADIO
》
. Stay tuned on this FM
frequency, your AutoDAB Connect and car radio are now synchronized.
7. If your car radio does not have AF feature, make the following to change to AutoDAB
Connect’s FMTX mode to AutoScan instead of the default AFC.
7.1 Press the
Rotary Knob
and then
MENU
to enter the menu function.
7.2 Rotate the
Rotary Knob [
◄] [►]
until the screen shows
《
LINKMODE
》
.
7.3 Press the
Rotary Knob
, and then rotate the
Rotary Knob
[
◄] [►]
until the
screen shows
《
AUTOSCAN
》
.
7.4 Press the
Rotary Knob
, the function of AutoScan is now enabled and the
AutoDAB Connect is operating in the AutoScan mode.
8. Listen to the DAB stations. Please refer to
USING REMOTE CONTROL KEYS
section for the system operation.
9. While you are using AutoScan function and you are experiencing noise on the
listening DAB station, please refer to
To Set FM Transmitting Frequency in AutoScan
Mode
to select a auto scanned FM frequency
,
or
To Set FM Transmitting Frequency
Manually
to manually switch to another FM frequency.
10. To avoid unnecessary draining of the car battery when AutoDAB Connect is idle,
after 4 hours of idling from the user
’s last action, AutoDAB Connect will be
automatically turned off. While in the standby mode, press the
Rotary Knob
to
return AutoDAB Connect back to the operating mode.
