Diagnostics Operations
Navigation
25
2. Tap
whenever you want to make a printing. A drop-down menu
appears.
a)
Print This Page
– prints a screenshot copy of the current
screen
b)
Print All Page
– prints a PDF copy of all displayed data
3. A temporary file will be created and send to the computer for
printing.
4. When the file is transferred successfully, a confirmation message
displays.
NOTE:
Make sure the display tablet is connected to the computer network,
either via Wi-Fi or LAN, before printing. For more instructions on printing, see
on page 14 for detailed information.
To submit Data Logging reports in Diagnostics
1. Tap the
Diagnostics
application button from the MaxiSys Job Menu.
The
Data Logging
button on the diagnostic toolbar is available
throughout the whole Diagnostics operations.
2. Tap the
Data Logging
button whenever you want to commit
recording for the system communication data. The button displays
blue during the active recording process.
3. Tap the button again to finish recording. A submission form will
display to let you fill in the report information.
4. Tap the
Send
button to submit the report form via the internet, a
confirmation message displays when sending is successful.
Status Information Bar
The Status Information Bar at the top of the Main Section displays the
following items:
1.
Menu Title
– indicates the menu subject of the Main Section
2.
Battery Icon
– indicates the battery status of the
VEHICLE
Main Section
The Main Section of the screen varies depending on the stage of operations.
The main section can show vehicle identification selections, the main menu,
test data, messages, instructions and other diagnostic information.
