Autel MAXISYS MS906 User Manual Download

Page: 90 / 106

Support Operations

User Complaint

Screen Layout

Figure 11-2

Sample Complaint Screen

The User Complaint screen consists of two parts.

Option Bar



Period Filter

– displays only the complaint records within the

defined period on the list



Status Filter

– displays the corresponding complaint records

according to the selected case status



New Complaint Button

– starts a new complaint case.

Complaint List

The complaint list normally displays all the complaint records of all time

and all status by default. The summary information for each complaint

item includes the Subject Name, Ticket ID, User’s Account ID, Date, and

the Case Status.
There are four kinds of the case status:



Open

– indicates the complaint case has been started but not

processed yet



Suspended

– indicates the complaint case is being processed

Summary of Contents for MAXISYS MS906











































































































Search results

Summary of Contents for MAXISYS MS906

Reviews:

Related manuals for MAXISYS MS906

Brands by name

Popular brands

Autel MAXISYS MS906, User Manual

Search results

Summary of Contents for MAXISYS MS906

Reviews:

Related manuals for MAXISYS MS906

Brands by name

Popular brands